3D Printing for Beginners Zero to First Print
Published 9/2026
Created by Educational Engineering Team
MP4 | Video: h264, 1920x1080 | Audio: AAC, 44.1 KHz, 2 Ch
Level: Beginner | Genre: eLearning | Language: English | Duration: 67 Lectures ( 4h 18m ) | Size: 1.1 GB
Choose the right 3D printer, compare FDM vs resin, set it up, load filament, make your first print and upgrade it.
What you'll learn
Choose the right type of 3D printer for their needs. Compare FDM and resin 3D-printing technologies. Evaluate the specifications that matter when buying a beginner 3D printer. Set up and prepare a modern FDM 3D printer safely. Load filament, calibrate the printer and complete a first print. Understand STL, 3MF, G-code and basic slicing concepts. Configure essential beginner slicing settings such as layer height, infill, walls and supports. Diagnose common first-layer and beginner printing problems. Select and print useful upgrades for a 3D printer.Requirements
No previous 3D-printing experience is required. No engineering or technical background is required. No CAD or 3D-modeling experience is required. You do not need to own a 3D printer before starting. Access to a 3D printer is helpful for completing the practical assignments but is not required to understand the course.Description
This is a hands-on beginner crash course that takes you from "I have never printed anything" to a complete, repeatable 3D printing workflow. You will learn how to pick a job worth printing, understand how a desktop machine actually works, slice a model, run (or simulate) the print, inspect the result, and fix the failures that stop most beginners in their first week.
You do not need to own a 3D printer on day one. Every section contains knowledge work you can finish at a desk: videos, articles, quizzes, and written assignments. When a machine finally arrives, you replay the setup and first-print sections with the printer in front of you. Nothing here requires you to buy hardware before you understand what you are buying.
By the end of this course you should be able to
Match a real use case to the right printing technology, and understand honestly where FDM wins and where resin wins.
Read a printer listing critically, without overvaluing advertised speed numbers, , and gadget extras.
Unbox and set up a desktop FDM printer using a clear safety checklist: surface, power, ventilation, transport screws, build surface.
Load PLA, run first-time calibration, and watch a first layer with intent instead of hoping.
Choose file type, orientation, supports, layer height, walls, and infill for a simple functional part.
Diagnose the most common failed prints - warping, stringing, poor adhesion, layer shifts - by changing one variable at a time.
Evaluate a printable accessory or upgrade before you print and install it.
Keep a simple print log so your results improve instead of resetting every time.
This course does not guarantee a successful print, a job, or income, and it does not accredit you as a technician. It also does not declare one single best printer, because the right printer depends on what you actually want to make. What it does give you is a beginner operating skill set and a reusable troubleshooting process you can apply to almost any desktop FDM or resin machine, whatever brand name is on the front.
What you do NOT need
A SPARKX i7 printer. It appears in this course only as a demonstration machine so you can watch a real unboxing, a real filament load, and a real first layer. It is never a required purchase.
Prior CAD experience. You will download and print existing models.
Prior slicer experience. We start from the first button.
A workshop. A stable indoor table with ventilation is enough for FDM and PLA.
Expensive filament. PLA is the recommended starting material.
Who this course is for
Complete beginners interested in 3D printing. Anyone considering buying their first 3D printer. New 3D-printer owners who want a structured introduction. Makers and hobbyists interested in creating physical objects. Students interested in additive manufacturing. Parents, educators and creators exploring desktop 3D printing. Anyone confused by 3D-printer specifications, filament, slicing or setup.Homepage
Code:
https://www.udemy.com/course/3d-printing-for-beginners-zero-to-first-printRecommend Download Link Hight Speed | Please Say Thanks Keep Topic Live
Rapidgator
ldicp.3D.Printing.for.Beginners.Zero.to.First.Print.part1.rar.html
ldicp.3D.Printing.for.Beginners.Zero.to.First.Print.part2.rar.html
AlfaFile
ldicp.3D.Printing.for.Beginners.Zero.to.First.Print.part1.rar
ldicp.3D.Printing.for.Beginners.Zero.to.First.Print.part2.rar
No Password - Links are Interchangeable
